Contact
Your Position: Home > ____ News ____ > Domestic News

The difference between non-negative pressure water supply equipment and box-type non-negative pressure water supply equipment

2019/8/16      view:

Difference between negative pressure water supply equipment and box-type water supply equipment without negative pressure:No negative pressure water supply equipment and is referred to as network overlying water supply equipment, on the market at present basically has no negative pressure tank water supply equipment and chamber without negative pressure water supply equipment without negative pressure water supply equipment is a kind of pressurized water supply unit, directly connected to municipal water supply network based on the municipal pipeline residual pressure series overlying water supply and ensure the municipal pipe network pressure set is not less than protection (set pressure must be higher than the plot straight for area demand, general not less than 1.2 Kg) of the secondary pressure water supply equipment at present, no negative pressure water supply equipment is mainly used in the market has two kinds:Steady flow tank (tank overlying water supply equipment) : tank no negative pressure water supply equipment installed in front of the pump pressure seal pot, pot set up internal or external steady flow compensator (also known as vacuum eliminator), the water pump through the steady flow tank water absorption, after pressure supply to the user, by the steady flow compensator adjust action, reduce the impact on the public water supply network adjustment tank (box overlying water supply equipment) :The box type non-negative pressure water supply equipment, this way has a certain amount of water reserve, can be used in the area of the water supply network is not stable. So the difference between the non-negative pressure water supply equipment and the tank type superposition water supply equipment is that the tank type superposition water supply equipment is a kind of non-negative pressure water supply equipment.

 负压供水设备和箱式无负压供水设备的区别:
   无负压供水设备又被称之为管网叠压供水设备,目前市场上主要有罐式无负压供水设备与箱式无负压供水设备。无负压供水设备是一种加压供水机组,直接与市政供水管网联接、在市政管网剩余压力基础上串联叠压供水而确保市政管网压力不小于设定保护压力(设定压力高于小区直供区压力需求,一般不低于1.2Kg)的二次加压供水设备。
   目前,市场上所用的无负压供水设备主要有2种:
稳流罐式(罐式叠压供水设备):罐式无负压供水设备在水泵前装设压力密封罐,罐内部或外部加设稳流补偿器(又称“真空xc器”),水泵通过稳流罐吸水,加压后供至用户,靠稳流补偿器的调节作用,降低对公共供水管网的影响。
调节水箱式(箱式叠压供水设备):
箱式无负压供水设备,此方式具备一定的储备水量,可用于供水管网不稳定的区域。
所以无负压供水设备和罐式叠压供水设备的区别是罐式叠压供水设备是无负压供水设备的一种。