Chemical pump working principle overview:Chemical pump chemical pump is suitable for the application scope of chemical oil metallurgical electricity papermaking pharmaceuticals and synthetic fibre etc, conveying any concentration of acid and alkali oxidant organic solvent reductant of harsh conditions, such as corrosive medium or high physical and chemical properties of the corrosive medium. Mainly has strong corrosion resistant chemical pump, fluorine plastic chemical pumps, etc. Chemical pump worksChemical pump before work, pump body and feed pipe line must be stinking liquid into a vacuum, when the fast rotating impeller blade makes liquid rapidly rotating, the rotating liquid materials under the action of centrifugal force, fly away from the impeller, pump in the water is thrown, the center of the impeller part form the vacuum area of liquid materials in the atmospheric pressure through the pipe network pressure in the feed tube under the action of this cycle, can realize continuous transmission in chemical pump start, the pump shell filled with liquid to be delivered;After the start, start, by the axis high-speed rotating impeller, the blade between the liquid must also with rotating under the action of centrifugal force, the liquid from the impeller center was thrown to the outer edge and gain energy, leaving the impeller outer edge at high speed into the volute pump casing in the volute, liquid due to the widening of flow deceleration, and can transform part of kinetic energy for static pressure, finally to high pressure into the discharge pipe, sent to the need to placeWhen the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. As the pressure above the liquid storage tank is greater than the pressure at the inlet of the pump, the liquid is continuously pressed into the impeller. As long as the impeller keeps rotating, the liquid will be continuously inhaled and discharged
    化工泵的工作原理概述：
　
    化工泵的应用范围
    化工泵适用于化工、石油、冶金、电力、造纸、制药和合成纤维等行业，输送任何浓度的酸、碱、氧化剂、溶剂、还原剂等苛刻条件的腐蚀性介质或物理、化学性能高的强腐蚀性介质．主要有强耐腐蚀化工泵,f塑料化工泵等等.
     
    化工泵的工作原理
    化工泵在工作前，泵体和进料管罐满液体行成真空状态，当叶轮快速转动时，叶片促使液体很快旋转，旋转着的液体物料在离心力的作用下从叶轮中飞去，泵内的水被抛出后，叶轮的部分形成真空区域。液体物料在大气压力的作用下通过管网压到了进料管内。这样循环不已，就可以实现连续输送。
     
    在化工泵启动前，泵壳内灌满被输送的液体；启动后，启动后，叶轮由轴带动高速转动，叶片间的液体也随着转动。在离心力的作用下，液体从叶轮中心被抛向外缘并获得，以高速离开叶轮外缘进入蜗形泵壳。
       
    在蜗壳中，液体由于流道的逐渐扩大而减速，又将部分动能转变为静压能，以较高的压力流入排出管道，送至需要场所。液体由叶轮流向外缘时，在叶轮形成了一定的真空，由于贮槽液面上方的压力大于泵入口处的压力，液体便被连续压入叶轮中。可见，只要叶轮不断地转动，液体便会不断地被吸入和排出。